Fiat Bravo 937A4000 Injectors

Fiat Bravo 937A4000 Overview

The Fiat Bravo with the 937A4000 Fiat / Opel 1.9 JTD / CDTi 150hp engine was produced between 2007 and 2009. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110391) operating at fuel pressures up to 2000 bar. The 937A4000 engine in the Fiat Bravo produces and of torque. When replacing injectors on the Fiat Bravo 937A4000, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Fiat Bravo

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Fiat Bravo

Other 937A4000 Vehicles

Related Pages

Bosch Fiat / Opel 1.9 JTD / CDTi 150hp — browse compatible engines, vehicles, and injectors