Skip to main content

Ships Worldwide•FREE UK•£50 International

Trade customer? Get Trade Pricing
OEM Tested
12-Month Warranty
Free UK Delivery
Same-Day Dispatch

SDBA Diesel Injectors

Compatible with Ford Focus, Ford Mondeo, Ford Transit Connect

  • OEM Tested & Calibrated
  • 12-Month Warranty
  • Free UK Delivery

Select the correct injector for your SDBA engine below

Fits Ford Focus, Ford Mondeo, Ford Transit Connect and more

Compatible Injectors for SDBA

  • OEM Tested
  • 12-Month Warranty
  • Free UK Delivery
Check CompatibilityCall 020 3355 6581
Order by 2pm — tracked UK courier

Common problems solved by these injectors

About the SDBA engine

The SDBA is a 2.0/2.2l tdci common rail diesel engine. This engine uses Delphi diesel injectors.

How Diesel Injectors Are Remanufactured

Watch our 3D walkthrough of the diesel injector remanufacturing process and see how injectors are professionally restored for reliable service.

Vehicles Using SDBA Engine

VehicleEngineYears
Ford Focus injector 1.8 TDCi2001–2005
Ford Mondeo injector 2.0 TDCi2001–2007
Ford Transit Connect injector 1.8 TDCi2002–2013

Common SDBA Injector Problems

1

Rough idle and engine vibration

Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.

2

Excessive exhaust smoke

Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.

3

Poor fuel economy

A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.

4

Engine misfire under load

Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.

5

Difficult cold starting

Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

6

Loss of power

Gradual power loss across the rev range, particularly above 2500 RPM, can indicate injector flow rate degradation.

7

Increased diesel knock

Louder than normal combustion noise, especially at idle, can indicate incorrect injection timing due to worn injector internals.

SDBA Technical Specifications

Displacement

—

Power

—

Torque

—

Fuel System

Common Rail Direct Injection

The SDBA is a 2.0/2.2l tdci common rail diesel engine. This engine uses Delphi diesel injectors.

Engine Intelligence

Ford Mondeo / Jaguar X-Type 2.0 & 2.2 TDCi (Duratorq — Delphi)

Documented failure modes

  • Delphi injector internal wear causing rising back-leak
  • Injector calibration drift causing rough running despite no hard fault
  • Electrical connector faults logging injector circuit codes

Diagnostic guidance

  • Delphi injectors on this platform carry a C2I calibration code — programme it after fitting or expect rough running
  • Run a leak-off comparison across all four injectors; a single high return identifies the failing unit
  • Check the injector loom and connectors above the rocker cover for heat damage before condemning injectors

Fault codes linked to this engine's injectors

Fitment note: The Duratorq TDCi family spans 2.0 and 2.2 outputs with different Delphi EJDR references — match the reference etched on the injector body before ordering.

Browse every diesel engine we cover →

Related SDBA Engine Guides

Related Pages

Delphi 2.0/2.2L TDCi — browse compatible engines, vehicles, and injectors

More resources for SDBA owners