BMW 6 Series (E63/E64) N43B20A Injectors

BMW 6 Series (E63/E64) N43B20A Overview

The BMW 6 Series (E63/E64) with the N43B20A BMW N43 / N52 / N53 Petrol Engines engine was produced between 2007 and 2010. This vehicle uses Siemens VDO / Continental common rail diesel injectors (primary part number 563000210) operating at fuel pressures up to 2000 bar. The N43B20A engine in the BMW 6 Series (E63/E64) produces and of torque. When replacing injectors on the BMW 6 Series (E63/E64) N43B20A, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in BMW 6 Series (E63/E64)

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for BMW 6 Series (E63/E64)

Other N43B20A Vehicles

Related Pages

Siemens VDO / Continental BMW N43 / N52 / N53 Petrol Engines — browse compatible engines, vehicles, and injectors