BMW 5 Series B47C20A Injectors

BMW 5 Series B47C20A Overview

The BMW 5 Series with the B47C20A 2.0L Diesel engine was produced between 2017 and 2023. This vehicle uses Bosch common rail diesel injectors (primary part number 13538514148) operating at fuel pressures up to 2000 bar. The B47C20A engine in the BMW 5 Series produces 85–100 kW (116–136 PS) and 270–300 Nm of torque. When replacing injectors on the BMW 5 Series B47C20A, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in BMW 5 Series

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for BMW 5 Series

Other B47C20A Vehicles

Related Pages

Bosch 2.0L Diesel — browse compatible engines, vehicles, and injectors