Alfa Romeo 147 939A6000 Injectors

Alfa Romeo 147 939A6000 Overview

The Alfa Romeo 147 with the 939A6000 Fiat / Opel 1.9 JTD / CDTi 150hp engine was produced between 2006 and 2010. This vehicle uses Bosch common rail diesel injectors (primary part number 0445110391) operating at fuel pressures up to 2000 bar. The 939A6000 engine in the Alfa Romeo 147 produces and of torque. When replacing injectors on the Alfa Romeo 147 939A6000, always use new copper sealing washers and torque to manufacturer specifications. Each injector should be coded to the ECU after fitting.

Compatible Injectors

Common Injector Problems in Alfa Romeo 147

• •
  Rough idle and engine vibration — Worn injector nozzles cause uneven fuel spray, leading to rough idle at low RPM. Most noticeable when the engine is cold.
• •
  Excessive exhaust smoke — Black or blue-grey smoke on acceleration indicates poor fuel atomisation. This is often caused by carbon buildup on the injector nozzle tip.
• •
  Poor fuel economy — A worn or leaking injector delivers incorrect fuel quantities, reducing efficiency by 10–20% in severe cases.
• •
  Engine misfire under load — Intermittent misfires during acceleration suggest one or more injectors are failing to deliver the correct fuel pressure.
• •
  Difficult cold starting — Degraded injector nozzles struggle to atomise fuel at lower cranking pressures, causing extended crank times in cold weather.

Other Engine Codes for Alfa Romeo 147

Other 939A6000 Vehicles

Related Pages

Bosch Fiat / Opel 1.9 JTD / CDTi 150hp — browse compatible engines, vehicles, and injectors